Ball Valves. A ball valve is a shut- off valve that controls the flow of a liquid or gas by means of a rotary ball having a bore. By rotating the ball a quarter turn (90 degrees) around its axis, the medium can flow through or is blocked. In special versions, ball valves are also […]

The Butterfly valve is used to regulate and control, throttle the flow. They are featured by a fast operation and low-pressure drop. To make an open position from the closed, it requires only a quarter turn. Wafer, lug, Single-Flange, Flange are the regular types of butterfly valves. [table id=5 /]

Strainer can be defined as a pipe fitting through which liquid is passed for purification, filtering or separation from solid matter, anything used to strain a liquid; any device functioning as a sieve or filter used to prevent solid bodies from mixing in a liquid stream or flowline. [table id=4 /]

A non-return valve is fitted to ensure that a medium flows through a pipe in the right direction, where pressure conditions may otherwise cause reversed flow. Non-return valves are e.g. used with mixing loops in heating and cooling systems to ensure proper operation, and with domestic water systems to prevent backflow. [table id=3 /]

A Globe valves is a linear motion valve and are primarily designed to stop, start and regulate flow. The disk of a Globe valve can be totally removed from the flow path or it can completely close the flow path. [table id=2 /]

Gate valves are broadly utilized for a wide range of uses and are appropriate for both over the ground and underground establishment. Not least for underground establishments it is fundamental to pick the correct sort of valve to evade high substitution costs. [table id=1 /]